Bariatric Patient Lift Drive Medical, Port Washington, NY, introduces The Electric Patient Lift. The lift charges fast from an AC outlet and can be used with four point and two point slings. To charge, simply plug in the unit—the battery does not need to be removed to be charged, and the lift will not operate while plugged in. The wide base provides additional stability. The lift has a heavy-gauge construction and a weight capacity of 600 pounds. The jumbo actuator pump with emergency button can switch to manual mode to lower the patient safely. There is an audible warning when the battery falls below 50%. The mast and base fold for easy storage and transportation, and the lift also has a limited lifetime warranty. (877) 224-0946; www.drivemedical.com.
CPAP Tubing CPAP Tubing from SP Medical LLC, Cleveland, is constructed from a metallocene plastomer wall with thermoplastic elastomer cuffs. The helical wall support design prevents collapsing while the smooth, clear interior offers excellent unobstructed flow characteristics. Standard lengths are available from 12 inches to 96 inches with cuffs sized to fit 22 mm male connections. The Medical CPAP Tubing is latex free, lightweight, and a cost-effective alternative to silicone cuff tubing. (800) 651-9490; www.SPMed.com.
Automatic Door Opener Power Access Corp, New Hartford, Conn, a manufacturer of door openers for the accessibility market, offers its new patented Model 2300 automated door opener, specifically designed for the residential market. The slim design of this easy-to-install, lower-cost, lighter-weight unit makes it ideal for home installation. The Model 2300 may be installed on the door or the jamb, in either left or right-handed mode. Control of the opener is achieved through a built-in radio receiver that interfaces with either a power access-supplied remote control, or with ECU, sip, puff, and other controls. Wireless or hard-wired wall plates, switches, and controls are also available. Integration with electric strikes (locks) is accomplished through the unit’s integral 24-VDC transformer. (800) 344-0088; www.power-access.com.
Single-fold Ramps Harmar Mobility, Sarasota, Fla, supplies single-fold ramps for smaller elevation changes. Harmar ramps use a nonskid metal surface with holes designed for excellent wet or dry grip. This surface offers improved traction, resists dirt and wear, reduces weight, and allows water and other elements to drain, making Harmar ramps safe and sure-footed for both indoor and outdoor use. (800) 833-0478; www.harmar.com.
Compressor Nebulizer System Respironics Inc, Murrys-ville, Pa, announces the release of its new Mini-Elite™ Compressor Neb-ulizer System for active patients who want to take their aerosol treatments wherever or whenever. The small and lightweight MiniElite compressor is easy to use and provides efficient nebulizer treatments. This compressor provides portability and can be powered by three versatile power source options—AC, car adapter, and battery. (800) 345-6443; www.respironics.com.
Full-face Mask The new 7600 Vmask is an Oro-Nasal (full-face) CPAP/bilevel mask from Hans Rudolph Inc (HRI), Kansas City, Mo, which can be tightened or loosened in the middle of the night without affecting the integrity of the leak-free seal because there is no hard frame or thin seal. All five sizes of the mask are made of a single piece of soft silicone and are dishwasher safe. The product now also comes with HRI’s Sensa Seal button-on accessory. According to HRI, great fits, durability, and low dealer price have made the 7600 Vmask the top choice of sleep laboratories, physicians, patients, and equipment providers. HRI has increased the bottom line for DMEs nationwide with their DME dollar deal on their dishwasher-safe full-face CPAP masks. The company also introduces its “Just Try One On” new Medtrade show discount program for DME dealers. (800) 456-6695; www.rudolphkc.com.